Homewyse is an online tool that assists homeowners, agents and contractors in estimating the costs of their projects. It uses the unit-cost method to estimate renovation cost and provides one of the best estimates.
Homewyse can calculate prices for a variety of remodeling and repair services including drywall installation. The website is a useful tool for estimating renovation and repairs costs, and can be especially helpful for real estate professionals who need to compare bids from different contractors.
Drywall Installation Costs
It all depends on how large and complex the project is. A simple rectangular room will be more expensive than a multi-story room with many angles and decorative soffits.
You can estimate a drywall project's cost by multiplying the square footage of the walls and ceiling by a contractor's per-square-foot price. For example, a 12 x 16 x 12-foot room with 12-foot ceilings will result in 444 ft of drywall.
Installing drywall is more expensive if your project involves replacing or repairing old wood panels or plaster walls. Removing old paneling and plaster walls, as well as labor, will increase the cost of replacing them.
Depending upon the size of your project you can expect to spend between $1.50-$3.0 per square feet to install drywall. This includes material, taping, finishing and hanging.
Cost To Hang Drywall
The difficulty of the job will determine the cost to hang drywall. A home with tall ceilings and lots of angles will take longer to finish than one without high ceilings or curved walls.
It is common for a contractor to charge between $60 and 120 cents per square foot to hang drywall. This will depend on the type, thickness, and sheet size.
A typical sheet of drywall is four-foot-by-eight-foot and comes in the standard thicknesses of 1/2" or 5/8". For repairs and curved walls, thinner 1/4" and 3/8" panels can be used.
Thin gypsum wallsboard is also available, and it's comparable in cost to drywall. This is also a common choice for small remodel projects and can save you money over using sheetrock.
Hanging drywall can cost a lot, especially for large projects. It is worth shopping around to get quotes. There are many contractors who will offer discounts to larger jobs. Lowes and The Home Depot offer competitive prices.
FAQ
Can I renovate my whole house myself?
Why pay someone to do it for you when you can do it yourself?
It doesn’t matter how much DIY is your passion, sometimes it can be difficult to do the job yourself. There may be too many variables involved for you to control.
If you have an older home, for example, the wiring might be outdated. To ensure safety and reliability, you will need to hire an electrician.
Consider that you may not be able repair any structural damage that might have occurred during the renovation.
In addition, you might not have the tools necessary to complete the job properly. If you want to install a new kitchen faucet, you will need a plumber's serpent, which is a tool that clears clogged pipes.
You must also follow plumbing codes to ensure that a licensed plumber is working on your project.
It is important to understand your capabilities before embarking on such a large task.
If you aren't sure if you have the skills or knowledge to tackle the task, get help from your family and friends.
They can give you advice on what steps you need to take and where you can go to learn more about the subject.
How Much Does it Cost to Renovate a House?
The cost to renovate a building depends on its material and complexity. Some materials like wood need additional tools, like saws or drills, while others like steel don't. The cost of renovations will vary depending on whether your contractor does all the work or you do it yourself.
The average home improvement project cost is between $1,000 and $10,000. The total cost for a home renovation project would be $5,000 to $25,000 if you hire professionals. The total cost of hiring professionals could be anywhere from $5,000 to $25,000. If you choose to complete the task yourself, it could run up to $100,000.
You should know that there are many factors which determine the final cost of renovation. These include the material used (e.g. You can choose between brick or concrete, and the size of your project as well. These are important considerations to remember when estimating total renovation cost.
How often should my furnace filter be changed?
The answer will depend on how often your family is going to use your heating system. You might consider changing your filter less frequently if you are likely to be away from your home for extended periods during the cold months. If you're not often out of your home, however, you may be more able to wait for the filter to change.
A typical furnace filter lasts approximately three months. This means you should change your furnace filters once every three months.
Check the manufacturer's guidelines for when you should change your filter. Some manufacturers recommend replacing your filter after each heating season, while others suggest waiting until there is visible dirt buildup.
Is there anything I could do to save on my home renovations?
It is possible to save money by doing the work yourself. Reduce the number and frequency of people you hire for the renovation. It is also possible to cut down on the cost of materials during renovations.
Statistics
- Most lenders will lend you up to 75% or 80% of the appraised value of your home, but some will go higher. (kiplinger.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- Design-builders may ask for a down payment of up to 25% or 33% of the job cost, says the NARI. (kiplinger.com)
External Links
How To
Do you prefer renovating exterior or interior?
Which one should i do first?
There are many aspects to consider when choosing which project should be started. The most important factor to consider is whether the building has been around for a while. You should consider the condition and age of the roof, windows, doors, flooring, electric system, etc. When the building is new, there are many things to consider such as its location, size, number, style, and so forth.
If your building is very old, you should first look at its roof. You might consider starting the renovation immediately if the roof appears to be in danger. The roof should be in good shape before you move on to the next stage. Next, check out the windows. You might need to replace them if they are damaged or stained. You can then go through your doors and clean them. You can now begin to install the flooring if everything looks fine. You should ensure that the flooring does not crack or become unstable no matter how many times you walk on them. Once these steps are done, then you can move on to the walls. Take a look at the walls to see if any cracks or damage are present. If the wall looks good, you can proceed to the next stage. Once the walls have been checked, you can begin to work on the ceiling. You should inspect the ceiling to ensure that it can withstand any weight you put on it. If everything checks out, then you can move forward with your renovation.
If the building was newly built, you'd probably start with its exterior. Start by looking at the outside. Is it clean? Are there cracks or holes? Does it look good? If your exterior isn't looking great, you should make some changes. You don't want your home to look poor. Next, examine the foundation. Repairing the foundation is a good idea if it appears weak. You should also inspect the driveway. It should be smooth and flat. If it's not, it should be fixed. The sidewalk should be checked as well when you inspect the driveway. You should replace the sidewalk if it's uneven.
After you have checked these areas, you can move on to the interior of your house. Begin by inspecting the kitchen. Is it clean and well kept? You should clean up any mess. Next, inspect the appliances. You should make sure that they are in working order and in good condition. If they aren’t in great shape, then either you buy new ones or replace them. Check the cabinets after this. If the cabinets are stained, or have been scratched, you can probably paint them. If they are in good order, you can move onto the bathroom. You should inspect the toilet here. If the toilet is leaking, you will need to replace it. If it's just dirty, then you should probably wash it. Next, make sure you inspect all the fixtures. Make sure they are clean. If they are dirty, then you should definitely clean them. The countertops should be inspected as well. Repainting countertops is advisable if they have cracked or are chipped. If they are smooth and shiny you can use a sealant.
The final step is to inspect the furniture. Make sure that none of it is missing or broken. If something is missing or damaged, then you should likely find it. You should repair anything that is damaged. Once you have checked everything, you can return outside to complete the job.